Team build exampleTOPWATER / STUDIO ORIGINAL
Popper 6262 mm
Surface ideas start with the cup.
3D preview of this designmm
Loading 3D…
Drag to rotate · Scroll or pinch to zoom
Display includes fittings. Metal components are not included in the printable STL files.
A painted and assembled example. Shape and fittings may differ from the design in the 3D viewer.
ABOUT THIS DESIGN
Your starting point.
A classic 62 mm popper with a cupped mouth. Experiment with the opening and body shape, then print, paint and test your creation on the water.
Digital checks and physical tests are different.
The attached build record has no completed assembly, watertightness, fitting retention or swimming checks. Example photos are not test results for this exact design.
DESIGN & BUILD NOTES
The details behind the design.
- Body length
- 62 mm
- Width setting
- 20 mm
- Height setting
- 20 mm
- Nominal wall
- 1.4 mm
- Ball weights
- 6 mm × 1
- Rigging
- Figure-eight fittings
- Measured finished weight
- Not recorded
- Editable format
- .lurelab.json / v43
Conditions in the attached build record
Bambu Lab A1 miniNozzle 0.4 mmPETG
Layer height and print orientation are not recorded. These are recorded conditions, not validated recommendations. Check orientation, walls and supports in your slicer.
Buoyancy and action: no measured results recorded. The app provides simplified estimates from the design and weight placement.
YOUR NEXT EXPERIMENT
What would you try first?
01
Adjust the cup angle
02
Give the cup a new color
03
Compare resting positions
Keep the original design name and your changes in a note. Small differences can reveal something interesting when you compare them.
Create a build note ↗Notes are saved on your device. They are not submitted or published to the site.
KEEP EXPLORING
Another design. Another idea.
Team build example
Team build example